

The BAVARIA ladder fall protection guard can be extended as required. It can easily be combined with other BAVARIA fall protection systems.
BAVARIA gable roof protection
Well secured on the verge
With two BAVARIA ladders and the basic module, you can reliably secure 5 m of verge. The gable edge protection can be extended laterally. The BAVARIA gable edge protection is world’s first to be pre-assembled at ground level without special tools. As the guardrail posts are being attached to the ladders, no rafter clamps or drill holes (in rafter or wall) are necessary. Securing to the roof by lashing straps is sufficient. A connection to anchor points provides maximum safety.
The roof pitch can be up to 45 degrees for protection on the gable side. If the guardrail is used on the eaves side, the slope must not exceed 10 degrees.
Two BAVARIA ladders with 100 mm rails are required for 5 metres of gable edge protection, three for 10 metres, etc.
Assembly in less than 10 minutes

1. Attach the guardrail posts to the ladders.

2. Adjust the position of the posts according to the roof overhang.

3. Raise the ladders and extend them to below the roof overhang.

4. Anchor the posts with lashing straps.

5. Hook guardrails into posts.

6. Fix the guardrail with a wedge lock.
Video about our BAVARIA gable protection system
You can find more product videos at
Service >> Product videos


